Mr. Coffee Espresso and Cappuccino Machine, Programmable Coffee Maker with Automatic Milk Frother and 15-Bar Pump, Stainless

4 reviews for Mr. Coffee Espresso and Cappuccino Machine, Programmable Coffee Maker with Automatic Milk Frother and 15-Bar Pump, Stainless

1. 

   Rated 5 out of 5

   The Rancher’s Wife – April 20, 2016

   I’ll give tips after a little background info, what wasn’t right and what customer service said to do, that WORKED!First off my background. I am not, nor have I every been a barista. I am an average person who likes mochas from the coffee shop, but I live 80 miles from town, so I don’t get them very often and wanted to try making them at home. This is my first espresso machine. I read a lot of blogs and watched online videos from real baristas giving tips how to make good espresso drinks at home before purchasing this. I got this thing and things didn’t taste right to me, bitter. So I did more research and figured out the problem, it wasn’t heating up well. I checked temperature and it was only getting to 157*F on average (too cold) and took 14-15 seconds to make one shot (too fast). NOT what the online advice says you need. Online advice says 170-180*F and 27-30 seconds is about right. So I called Mr Coffee for help before I sent it back to Amazon. GLAD I did.The call: In short, customer service told me to run a cleaning cycle per directions from page 16 in the user manual. Which is 1/2 tank of white vinegar, hit the button for double shot. Repeat as many times as you need. Also run a cleaning cycle through the milk dispenser. My thought was, “what the heck, its a new machine! I did the priming as directed before use, how can it be dirty?” But I had to give it a try or send it back. Well I’ll be go to heck, it WORKED!While directions said you only need to run it few times. I had the time, so I ran the whole 1/2 tank white vinegar through (double shot at at a time) since I has to toss the vinegar anyway, so why not really clean it eh? Anyway, after a couple times running the double shot espresso button the temperature went from consistent 157*F to 175-182*F. Wahoo! It seemed to matter how long I let it warm up between shots. Running two times consecutively got the 175-177*, which is just what you want. Letting it sit and warm up a few minutes before runs got it 180-184*, which is getting a little too hot. BTW, I was using a good quality quick, calibrated thermometer that I use for caramel making, which is a very exacting process to do right. So I figured it could accurately measure the espresso before it cooled from air temperature, which by the way is mere seconds I found out.NOTE: The higher temperature is NOT for drinking comfort (how hot you like it) it is what the espresso NEEDS to properly extract and not be bitter. You can let it sit a few minutes if you don’t like it that hot, personally I don’t want a burned tongue, so I wait a little. Coming out of the machine perfect drinking temperature is NOT a good thing.SECOND NOTE: Running the vinegar through is NOT descaling, it is cleaning. Descaling is something else you do, read the manual on how. The vinegar clean is NOT priming, it is cleaning. Don’t know why you need to clean the new machine in addition to priming, but DO it anyway. Make sure to rinse the reservoir out, then run some PLAIN water through to remove the vinegar afterwards, do it as many times as it takes to get the smell out, mine took a full reservoir. Honestly though it’s faster shipping it back and waiting for a replacement machine because it doesn’t get hot enough, this WORKS.When I first got it, as I said it was taking 14-15 seconds to run the shots through. During the cleaning process they got longer and longer. Now that it’s clean, it’s about 28-30 seconds. Again, just what you want. I use my cell phone stop watch feature to be accurate.In summary, based on what I’ve read and how I got it to work well, at least for “normal” person standards. This a good machine. Here’s my TIPS TO GET IT WORKING RIGHT:1. Learn to grind grounds well. Do NOT buy pre-ground, buy beans and grind them yourself. It has to do with when the oil is release one how well it works. If you are going to the trouble to use a machine like this (rather than just normal a coffee machine) you can go to the effort to grind as well, it’s just part of the process.You can use the hand held cone burr grinders for the most accurate fine ground. Or you can spend a bundle on an electric burr grinder. From what I read, you REALLY do need to get a good one if you go electric. In fact that is almost more important than the machine they say. Inconsistent size of grounds will yield inconsistent shots. Too fine (Turkish grind, which is like flour) and it clogs the filter making the machine unable to push all the water through. Too course (regular coffee machine grind) and the water goes through too fast making it bitter. Espresso grind has to be the consistency of table salt.I’m cheap, so using the hand grinder does work and I advise it for other cheap people. However, in the morning I am cranky and impatient, I’m also lazy, so I’ve ordered a couple different electric burr grinders to see if that works as well. I plan to return which ever (or both) that don’t grind as the espresso NEEDS (good ol Amazon prime and their return policies). No, I did not take the online baristas advice and buy a $200 burr grinder (I am cheap after all), but I did spend about $50 on a burr grinder and $20 on a blade style. Will update when I have decided what works or not, which I kept or if I end up just doing the hand grind.2. Learn how full to fill the cup. At least to the top of the rim, or a little higher. You want the end result about 1/8-1/4″ from the top. The amount in the cup DOES matter.3. Learn how to pack your grounds to 30lbs of pressure. How to do that, put your bathroom scale on the counter. Use your tamper to push until you get the feel of 30lbs pressure. Repeat several times until you can push it pretty accurately. This is very important. Also, but a metal tamper, the plastic one isn’t sturdy enough for 30 lbs pressure, it bents and packs unevenly. You can get metal tampers cheap, it’s worth it.4. Before you make your cup each morning, warm the machine as directions indicate, but ALSO run a shot of plain water through first. The second time through will be hotter, and it only takes 30 seconds.5. Even though it’s a new machine, and you did the priming as the manual says, run 1/2 tank of white vinegar through it (directions on page 16 of manual) and it will make a tremendous difference. Don’t argue, just do it.6. You can open the lid and fill the reservoir with it ON the machine with a pitcher if taking it on and off is too hard.NOTE: I did NOT receive this at a discount in exchange for an honest review. This is a good machine for the average espresso based specialty coffee drinker. I gave it a full 5 stars because it’s pretty idiot proof (I’m not the most mechanical person) and it makes mochas that are pretty darn good in my average persons opinion. I have no idea what a real coffee expert would say, and really, shouldn’t they have a professional machine anyway? […]

2. 

   Rated 5 out of 5

   “leilacav” – July 29, 2023

   We have put this espresso machine to use every day, since receiving it! Everyone loves it! There are too many convenient features about this espresso machine:Easily makes the most common drinks by just selecting the right button and whether single or double.If you want more espresso or frothed milk, just press the button to add more.You don’t need a separate milk pitcher, you just put milk into the milk container and dial the amount of frothing you want.Clean up: when you’re done with the milk, you just remove the milk and add water, then press the “clean” button and it pumps steam through the milk dispense tube to clean that.So easy and convenient! Love it! I really hope this machine lasts for years!The size is also very convenient to keep on your counter. It is much smaller than a ‘professional’ espresso machine, and about the size of a Keurig…maybe a little smaller. …Our Keurig is not getting much use since this espresso machine showed up.

3. 

   Rated 4 out of 5

   Christopher Evensen – March 23, 2020

   It took me almost a month to write this review. Even though this is probably the easiest latte machine you could possibly buy, there are still a couple of variables that will take you some time to work out if you’ve never had an espresso machine before. The variables that will affect the quality of your drink are as follows:1. Coffee quality and grind size (please buy whole bean and grind yourself with a quality grinder).2. Amount of espresso you try to cram into the porta-filler.3. Temperature of the water coming from the machine.4. Level-ness and tamp pressure you put on the espresso in the porta-filler.For #1: Buying a whole bean from a local roaster that is as fresh as possible is ideal. Buying it whole bean is even more important. The quality and taste of the coffee declines quickly as soon as it is ground, even in a bag you re-seal. In a coffee container that is air-tight like the coffee gator, it will last a bit longer, but still. Just buy whole bean and suck it up. Next, the grinder should be a burr type grinder (I bought the mueller conical burr grinder). Finally, dialing in the grind size is important. At first I went with the smallest grind setting on the grinder, but it wasn’t ideal. The grounds were too small and didn’t allow enough head pressure to get through the machine. Result was poor tasting espresso with no crema. I settled on ‘3’ on the mueller which is on a 1 (finest) to 10 scale.For #2 AND #4: I battled with this for way too long. Everything online says to put 13-18 grams of coffee into a double porta-filler. The most I could ever get was 15 and that was after tamping the hell out of it so I could cram more and more in. Result was same as #1 with too fine a grind. I finally threw the common internet wisdom for grams out the window and just did it by logic and feel. Numbers wise, it’s somewhere around 11g of grinds. Logic-wise it’s ‘fill to top of porta-fill. tap tap tap on the counter to settle and even it. Fill again from grinder to top. tap tap tap to even. Take your tamper (buy the nice heavy metal one for 15 bucks) and apply force as evenly as possible. Don’t do 30lbs of pressure like they say online. With a home machine like this with 15 pressure head, 30lbs of tamp force is way too much and will barely allow the water pressure to come through making terrible coffee. Just do a nice twist/push with a LITTLE bit of weight/pressure. Try to get the puck as even as possible.For #3: This one was weird. I measured the temp of the water coming directly out of the pump with a hand held thermometer. It was consistently around 155-163d. This is not nearly hot enough. Online, the consensus is 180-190d. I thought the machine was broken, but I read a review or two that said to descale it and it would help. On a new machine? Weird, but IT WORKS. I didn’t have vinegar, so I used CLR mixed with water. I ran a full reservoir of that mixed solution, then a full reservoir of just clean water. Result? Water temps were instantly 180-187d. Fixed. We are on a well on top of a mountain so we have hard minerals. I have to do this about every 2 weeks, but it’s worth it.Overall I am happy. Even with the above, the consistency of my pour/shot varies (which I hate!). It’s pretty dialed in where I’ll only pull a crappy non-crema shot once in ten tries. When that happens, I’m still not 100% clear on if I didn’t follow my own advice above closely/carefully enough or if the machine can just be inconsistent sometimes. You can tell instantly how good the shot is going to be. For a double, it should be about 5 seconds of dark coffee coming out, followed by 10 seconds of perfect looking crema, followed by 5 seconds of slightly watered down looking crema. You can kill the watery crema by hitting the espresso button on the machine again. When you are pulling a really crappy shot, you will get dark coffee followed by what looks like really watery coffee. I have no idea why this happens. Will update this if I nail it down. Otherwise, 9/10 times it makes great espresso shots!The latte portion of this machine works great and just as advertised. Sometimes if you put it on Latte as ooposed to espresso froth it can jip you a little bit on the amount of steamed milk it gives you. If this happens, just run the latte cycle again and stop it manually when you have the amount of froth you want.Cleaning is pretty easy, but takes some time. You have to keep pushing the clean cycle every time it ends. I wish it would just do it continuously until the water runs out.I tried a couple of other machines and espresso specific machines. None of them were worth the hassle and this Mr Coffee is so much easier/time saving. The espresso specific machines I tried from DeLonghi took way too much time to make myself a latte in the morning because of the separate frother. Yea, I know 1st world problems but between setting it up, making it, and cleaning it we’re talking 10-15 min vs 5. When you have to run to work that time savings makes a difference.Overall, I’m really happy with it after figuring things out. Will update is something crazy happens.

4. 

   Rated 4 out of 5

   OK, Cliff! – July 16, 2023

   I was saving for a Gaggia Italian espresso machine, but this one was on sale for Prime Days, so I decided to give it a try. I’ve been using a French press to make my daily coffee for over ten years, but have always loved the crema and foam on a good cappuccino or latte. This machine makes producing a good quality drink easy, at 1/4 or less than the price of other machines. I bought some Italian gran crema coffee beans, a good bur grinder, and went to town making a cappuccino the day after this machine arrived. Delicious! I wish the end product was slightly hotter, but if you get to sippin’ right away it’s about perfect. Maybe if I warmed the milk up a little before putting it in its tank the drink would be just right. For a cheap machine, even when not on sale, this will take care of you coffeehouse drink cravings.